Let's make it easier to figure out when we see an invalid journal file, why we
consider it invalid, and add some minimal debug logging for it.
This log output is normally not seen (after all, this all is library code),
unless debug logging is exlicitly turned on.
When date is changed in system to future and normal user logs to new journal file, and then date is changed back to present time, the "journalctl --list-boot" command goes to forever loop. This commit tries to fix this problem by checking first the boot id list if the found boot id was already in that list. If it is found, then stopping the boot id find loop.
Allowed paths are unified betwen the configuration file parses and the bus
property checker. The biggest change is that the bus code now allows "block-"
and "char-" classes. In addition, path_startswith("/dev") was used in the bus
code, and startswith("/dev") was used in the config file code. It seems
reasonable to use path_startswith() which allows a slightly broader class of
strings.
Fixes#3935.
If `--test` command line option was passed, the systemd set skip_setup
to true during bootup. But after this we check again that arg_action is
test or help and opens pager depends on result.
We should skip setup in a case when `--test` is passed, but it is also
safe to set skip_setup in a case of `--help`. So let's remove first
check and move skip_setup = true to the second check.
This makes it easier to debug failed nspawn invocations:
Mounting sysfs on /var/lib/machines/fedora-rawhide/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev (MS_NOSUID|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev/shm (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=1777,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/run (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Bind-mounting /sys/fs/selinux on /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_BIND "")...
Remounting /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting proc on /proc (MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Bind-mounting /proc/sys on /proc/sys (MS_BIND "")...
Remounting /proc/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Bind-mounting /proc/sysrq-trigger on /proc/sysrq-trigger (MS_BIND "")...
Remounting /proc/sysrq-trigger (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting tmpfs on /tmp (MS_STRICTATIME "mode=1777,uid=0,gid=0")...
Mounting tmpfs on /sys/fs/cgroup (MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_STRICTATIME "mode=755,uid=0,gid=0")...
Mounting cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr")...
Failed to mount cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr"): No such file or directory
If stdin is supplied as an fd for transient units (using the
StandardInputFileDescriptor pseudo-property for transient units), then we
should also fix up the TTY ownership, not just when we opened the TTY
ourselves.
This simply drops the explicit is_terminal_input()-based check. Note that
chown_terminal() internally does a much more appropriate isatty()-based check
anyway, hence we can drop this without replacement.
Fixes: #4260
r was not initialized and would be used if "tcp" was the only option
used for the stub. We should initialize it to 0 to indicate that no
error happened in the udp case.
SIGTERM should be considered a clean exit code for daemons (i.e. long-running
processes, as a daemon without SIGTERM handler may be shut down without issues
via SIGTERM still) while it should not be considered a clean exit code for
commands (i.e. short-running processes).
Let's add two different clean checking modes for this, and use the right one at
the appropriate places.
Fixes: #4275
When we print information about PID 1's crashdump subprocess failing. In this
case we *know* that we do not generate LSB exit codes, as it's basically PID 1
itself that exited there.
Previously we've used free_and_strdup() to fill arg_default_unit with unit
name, If we didn't pass default unit name through a kernel command line or
command line arguments. But we can use just strdup() instead of
free_and_strdup() for this, because we will start fill arg_default_unit
only if it wasn't set before.
Let's get rid of is_clean_exit_lsb(), let's move the logic for the special
handling of the two LSB exit codes into the sysv-generator by writing out
appropriate SuccessExitStatus= lines if the LSB header exists. This is not only
semantically more correct, bug also fixes a bug as the code in service.c that
chose between is_clean_exit_lsb() and is_clean_exit() based this check on
whether a native unit files was available for the unit. However, that check was
bogus since a long time, since the SysV generator was introduced and native
SysV script support was removed from PID 1, as in that case a unit file always
existed.
We are going to add this child as a source to our event loop so we don't
want to block when reading data from it as this will prevent us from
processing other events. Specifically this will block the signalfds
which means if we are waiting for data from curl we won't handle SIGTERM
or SIGINT until we happen to get more data.
Do not make up our own type for ExitStatus, but use the type used by POSIX for
this, which is "int". In particular as we never used that type outside of the
definition of exit_status_to_string() where we internally cast the paramter to
(int) every single time we used it.
Hence, let's simplify things, drop the type and use the kernel type directly.
It is impossible to ship a fully generic PAM configuration upstream.
Therefore, ship a minimal configuration with the systemd --user requirements,
and add a note to DISTRO_PORTING documenting this.
Fixes#4284
systemd fills arg_default_unit during startup with default.target
value. But arg_default_unit may be overwritten in parse_argv() or
parse_proc_cmdline_item().
Let's check value of arg_default_unit after calls of parse_argv()
and parse_proc_cmdline_item() and fill it with default.target if
it wasn't filled before. In this way we will not spend unnecessary
time to for filling arg_default_unit with default.target.
When running in a user namespace without private networking, resolved would
fail to start. There isn't much difference between EADDRINUSE and EPERM,
so treat them the same, except for the warning message text.
Make sure an error is always printed… When systemd-resolved is started in a
user namespace without private network, it would fail on setsockopt, but the
error wouldn't be particularly informative:
"Failed to start manager: permission denied."
According to TCG EFI Protocol Specification for TPM 2.0 family,
all events generated after the invocation of EFI_TCG2_GET_EVENT_LOG
shall be stored in an instance of an EFI_CONFIGURATION_TABLE aka
EFI TCG 2.0 final events table. Hence, it is necessary to trigger the
internal switch through calling get_event_log() in order to allow
to retrieve the logs from OS runtime.
msekletar:
> I've looked at EDK2 and indeed log entry is added to FinalEventsTable only after
> EFI_TCG2_PROTOCOL.GetEventLog was called[1][2]. Also, same patch was currently
> merged to shim by Peter Jones [3].
[1] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L698
[2] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L824
[3] rhinstaller/shim#64
The documentation says lists "yes", "no", "pick", and numeric arguments.
But parse_boolean was attempted first, so various numeric arguments were
misinterpreted.
In particular, this fixes --private-users=0 to mean the same thing as
--private-users=0:65536.
While at it, use strndupa to avoid some error handling.
Also give a better error for an empty UID range. I think it's likely that
people will use --private-users=0:0 thinking that the argument means UID:GID.
Current systemd version detection routine cannot detect systemd 230,
only systmed >= 231. This means that we'll still use the legacy hierarchy
in some cases where we wouldn't have too. If somebody figures out a nice
way to detect systemd 230 this can be later improved.
