Let's be more accurate about what this function does: it checks whether
the underlying reported inode is the same. Internally, this already uses
a better named stat_inode_same() call, hence let's similarly name the
wrapping function following the same logic.
Similar for files_same_at() and path_equal_or_same_files().
No code changes, just some renaming.
The cmd(3) man page says about CMSG_DATA():
> The pointer returned cannot be assumed to be suitably aligned for
> accessing arbitrary payload data types. Applications should not cast
> it to a pointer type matching the payload, but should instead use
> memcpy(3) to copy data to or from a suitably declared object.
Hence, if we want to use unaligned data in cmsg, we need to copy it
before use. That's typically important for reading timestamps in
RISCV32, as the time_t is 64bit and size_t is 32bit on the system.
-1 was used everywhere, but -EBADF or -EBADFD started being used in various
places. Let's make things consistent in the new style.
Note that there are two candidates:
EBADF 9 Bad file descriptor
EBADFD 77 File descriptor in bad state
Since we're initializating the fd, we're just assigning a value that means
"no fd yet", so it's just a bad file descriptor, and the first errno fits
better. If instead we had a valid file descriptor that became invalid because
of some operation or state change, the other errno would fit better.
In some places, initialization is dropped if unnecessary.
We now have a local implementation in string-util-fundamental.c, but
it's useful at a lot of other places, hence let's give it a more
expressive name and share it across the tree.
Follow-up for: 8d9156660d
This is a short helper for connecting to AF_UNIX sockets in the file
system. It works around the 108ch limit of sockaddr_un, and supports
"at" style fds.
This doesn't come with a test of its own, but the next patch will add
that.
This way we can implement nice fallbacks later on.
While we are at it, provide a test for this (one that is a bit over the
top, but then again, we can never have enough tests).
Also,
- drop unnecessary +1 from buffer size, as IF_NAMESIZE or IFNAMSIZ
includes the nul at the end.
- format_ifname() does not update buffer on failure,
- introduces format_ifname_alloc(), FORMAT_IFNAME(), and their friends.
It does the same stuff, let's use the same codepaths as much as we can.
And while we are at it, let's generate good error codes in case we are
called with unsupported parameters/let's validate stuff more that might
originate from user input.
So Linux has this (insane — in my opinion) "feature" that if you name a
network interface "foo%d" then it will automatically look for the
interface starting with "foo…" with the lowest number that is not used
yet and allocates that.
We should never clash with this "magic" handling of ifnames, hence
refuse this, since otherwise we never know what the name is we end up
with.
We should probably switch things from a deny list to an allow list
sooner or later and be much stricter. Since the kernel directly enforces
only very few rules on the names, we'd need to do some research what is
safe and what is not first, though.
Numeric ifnames should be acceptable only if that's enabled by flag, and
refused otherwise. Hence, let's parse as ifindex first, and if that
works decide. Finally, let's refuse any numeric ifnames that are not
valid ifindexs, but look like them.
A variety of sockopts exist both for IPv4 and IPv6 but require a
different pair of sockopt level/option number. Let's add helpers for
these that internally determine the right sockopt to call.
This should shorten code that generically wants to support both ipv4 +
ipv6 and for the first time adds correct support for some cases where we
only called the ipv4 versions, and not the ipv6 options.
We would set .type to a fake value. All real callers (outside of tests)
immediately overwrite .type with a proper value after calling
socket_address_parse(). So let's not set it and adjust the few places
that relied on it being set to the fake value.
socket_address_parse() is modernized to only set the output argument on
success.
If the interface scope is specified, this changes the meaning of the address
quite significantly. Let's show the IPv6 scope_id if present.
Sadly we don't even have a test for sockaddr_pretty() output :(
This will be implicitly tested through socket_address_parse() later on.
The commit 10ce2e0681 inverts the order of
SO_{RCV,SND}BUFFORCE and SO_{RCV,SND}BUF. However, setting buffer size with
SO_{RCV,SND}BUF does not fail even if the requested size is larger than
the kernel limit. Hence, SO_{RCV,SND}BUFFORCE will not use anymore and
the buffer size is always limited by the kernel limit even if we have
the priviledge to ignore the limit.
This makes the buffer size is checked after configuring it with
SO_{RCV,SND}BUF, and if it is still not sufficient, then try to set it
with FORCE command. With this commit, if we have enough priviledge, the
requested buffer size is correctly set.
Hopefully fixes#14417.
Prompted by the discussion on #16110, let's migrate more code to
fd_wait_for_event().
This only leaves 7 places where we call into poll()/poll() directly in
our entire codebase. (one of which is fd_wait_for_event() itself)
poll() sets POLLNVAL inside of the poll structures if an invalid fd is
passed. So far we generally didn't check for that, thus not taking
notice of the error. Given that this specific kind of error is generally
indication of a programming error, and given that our code is embedded
into our projects via NSS or because people link against our library,
let's explicitly check for this and convert it to EBADF.
(I ran into a busy loop because of this missing check when some of my
test code accidentally closed an fd it shouldn't close, so this is a
real thing)
