Running `test-path` under an umask such as 027 fails with:
Assertion '(s.st_mode & S_IRWXO) == 0004' failed at ../src/test/test-path.c:247, function test_path_makedirectory_directorymode(). Aborting.
Looking at directory /tmp/test-path_makedirectory, it was indeed created
with mode 0740, applying the umask to the requested 0744.
Set an explicit umask for this test, to ensure reproducible results.
symlink_atomic returns -EISDIR when the target symlink path is a
directory.
Fixes#7447
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Filter-out RPMB partitions and boot partitions from MMC devices when
counting partitions enumerated by the kernel. Also factor out the now
duplicated code into a separate function.
This complement the previous fixes to the problem reported in
https://github.com/systemd/systemd/issues/5806
Accept definitions to other AF_ constants, not just PF_ ones,
such as:
#define AF_LINUX AF_LOCAL
It may not be necessary to impose any restriction on the
definitions of the macros extracted, but for now
keep most of that requirement but match AF_* as well.
sd_bus_open/sd_bus_open_system/sd_bus_open_user are convenient, but
don't allow the description to be set. After they return, the bus is
is already started, and sd_bus_set_description() fails with -EBUSY.
It would be possible to allow sd_bus_set_description() to update the
description "live", but messages are already emitted from sd_bus_open
functions, so it's better to allow the description to be set in
sd_bus_open/sd_bus_open_system/sd_bus_open_user.
Fixes message like:
Bus n/a: changing state UNSET → OPENING
By default both processes, systemd-inhibit and the forked one, receive
the signals. Pressing Ctrl+C on the keyboard results in SIGINT being
sent to the processes, followed by SIGTERM being sent to the forked
process when systemd-inhibit exits. This can cause trouble when the
forked process does not clean up properly but exit immediately.
Instead make systemd-inhibit ignore SIGINT, leaving it to the forked
process to clean up and exit.
Note: in check_triggering_units 'path' will be allocated twice. This is a
conscious choice, this way the implementation is simpler and not worth
optimizing.
Fixes#8519.
This adds flags BUS_MAP_STRDUP and BUS_MAP_BOOLEAN_AS_BOOL.
If BUS_MAP_STRDUP is set, then each "s" message is duplicated.
If BUS_MAP_BOOLEAN_AS_BOOL is set, then each "b" message is
written to a bool pointer.
Follow-up for #8488.
See https://github.com/systemd/systemd/pull/8488#discussion_r175816270.
The initial fix for relabelling the cgroup filesystem for
SELinux delivered in commit 8739f23e3 was based on the assumption that
the cgroup filesystem is already populated once mount_setup() is
executed, which was true for my system. What I wasn't aware is that this
is the case only when another instance of systemd was running before
this one, which can happen if systemd is used in the initrd (for ex. by
dracut).
In case of a clean systemd start-up the cgroup filesystem is actually
being populated after mount_setup() and does not need relabelling as at
that moment the SELinux policy is already loaded. Since however the root
cgroup filesystem was remounted read-only in the meantime this operation
will now fail.
To fix this check for the filesystem mount flags before relabelling and
only remount ro->rw->ro if necessary and leave the filesystem read-write
otherwise.
Fixes#7901.
This is a separate commit only because it actually *increases* memory allocations:
==3256== total heap usage: 100,120 allocs, 100,120 frees, 13,097,140 bytes allocated
to
==4690== total heap usage: 100,121 allocs, 100,121 frees, 14,198,329 bytes allocated
Essentially, we do a little more work to reduce the memory footprint a bit. For a
test where we just allocate the memory and drop it soon afterwards, this is not
beneficial, but it should still be useful for a long running program.
ubsan times out because we do too many allocations:
$ valgrind build/fuzz-unit-file test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full
...
test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full... ok
==1757==
==1757== HEAP SUMMARY:
==1757== in use at exit: 0 bytes in 0 blocks
==1757== total heap usage: 199,997 allocs, 199,997 frees, 90,045,318,585 bytes allocated
...
==3256== total heap usage: 100,120 allocs, 100,120 frees, 13,097,140 bytes allocated
https://oss-fuzz.com/v2/issue/4651449704251392/6977 should now be really fixed.
e3c3d6761b was the first attempt, but even with this change, e3c3d6761b
still makes sense.
Re-use the hacks used to link user keyring, when creating the session
keyring. This way changing ownership of the keyring is not required, and thus
incovation_id can be correctly created in restricted environments.
Creating invocation_id with root permissions works and linking it into session
keyring works, as at that point session keyring is possessed.
Simple way to validate this is with following commands:
$ journalctl -f &
$ sudo systemd-run --uid 1000 /bin/sh -c 'keyctl describe @s; keyctl list @s; keyctl read `keyctl search @s user invocation_id`'
which now works in LXD containers as well as on the host.
Fixes: https://github.com/systemd/systemd/issues/7655
It might happen that we try to bisect through a chain of offset arrays in the
journal whose last element was just allocated but no item yet written
to. In that case that array will be all NUL, but it might still end up
in our array chain cache. If it does, we cannot use it for bisection,
since for bisection we need to know the value of the first entry in that
array, but if it's uninitialized it does not have a first value. Hence,
as a simple fix, in this unlikely case, simply ignore the chain cache.
This is supposed to fix the issue pointed out in #8432, but in a more
permissive way, as this case isn't strictly a badly formatted journal
but actually a valid state (though one within a very short time window),
and we should make the best of it, and handle it gracefully.
Background: in each journal file entries are linked up in large arrays
of offsets. In each array the entries are strictly ordered by the
offsets of the entries, which permits search by bisection. These arrays
are allocated with a fixed size and then filled up as entries are added
to the journal file. If an array is fully filled up, a new array
(double in size as the old one) is appended to the journal file, and
linked up. This means, the journal file will contain a series of chained
up arrays, each time doubling in size, and strictly ordered. When
looking for an entry we maintain a "chain cache", which allows us to
bypass traversing the chain in full if we look for entries close to each
other in a short time. With the fix above we make sure we don't
erroneously use a chain cache item that doesn't carry enough information
for this bisection to work.
Original issue identified (with patch) by @Kxuan.
Replaces: #8432
This reworks the SELinux and SMACK label fixing calls in a number of
ways:
1. The two separate boolean arguments of these functions are converted
into a flags type LabelFixFlags.
2. The operations are now implemented based on O_PATH. This should
resolve TTOCTTOU races between determining the label for the file
system object and applying it, as it it allows to pin the object
while we are operating on it.
3. When changing a label fails we'll query the label previously set, and
if matches what we want to set anyway we'll suppress the error.
Also, all calls to label_fix() are now (void)ified, when we ignore the
return values.
Fixes: #8566
NPAR is a technology that allows a single network interface to
be divided into number of partitions. The partitions show up
as functions on the same PCI device... when there are more than
8 functions, ARI (alternative routing-ID interpretation) is
used. With ARI is enabled, the 8 bit field that normally has 5
bits for the PCI device and 3 bits for the PCI function is instead
interpreted as (implicit) device 0, with 8 bits for the function
number.
Because the linux kernel exposes the PCI device/function numbers
to userspace the same regardless of whether ARI is enabled,
systemd predictable device naming can generate unpredictable
names in this case, because network names using the PCI slot use
the function number, but not the device number, causing systemd
to generate the same name for mulitple network devices (so some
will revert to the "ethX" names).
With this patch, device naming code checks if ARI is enabled for
a PCI network device, and uses the full 8-bit function number
for naming to avoid this situation. This should improve
readability and predictability of device names.
Here is an example of how this change would affect naming:
before patch | after patch
-----------------------------
ens2f0 | ens2f0 NPAR partition 0 (in PCI slot 2)
ens2f1 | ens2f1 NPAR partition 1
...
ens2f7 | ens2f7 NPAR partition 7
eth1 | ens2f8 NPAR partition 8
eth2 | ens2f9 NPAR partition 9
With PCI SR-IOV, a number of virtual network devices can be enabled,
all of which share the same physical network device. Currently,
udev generates names for SR-IOV virtual functions as if they were
independent network devices.
With this change, the predictable network device naming code will
check if a network device is an SR-IOV virtual device, and will
generate a name based on the physical PCI device plus a "v%u"
suffix. This should improve readability and predictability of
device names.
Here is an example of how this change would affect naming:
before patch | after patch
-----------------------------
eno1 | eno1 onboard NIC, physical function
enp101s0f0 | eno1v0 onboard NIC, SR-IOV virtual func 0
enp101s0f1 | eno1v1 onboard NIC, SR-IOV virtual func 1
To generate predictable network device names, the code in
udev-builting-net_id.c tries to match the PCI device address
of the network device to the entries in /sys/bus/pci/slots.
However, sometimes the slot number is not associated the
network controller PCI device itself, but rather with one of
its parents.
This change will try to find a match in /sys/bus/pci/slots for
the parents of the PCI network device, if it doesn't find a
match for the device itself.
linux/fs.h sys/mount.h, libmount.h and missing.h all include MS_*
definitions.
To avoid problems, only one of linux/fs.h, sys/mount.h and libmount.h
should be included. And missing.h must be included last.
Without this, building systemd may fail with:
In file included from [...]/libmount/libmount.h:31:0,
from ../systemd-238/src/core/manager.h:23,
from ../systemd-238/src/core/emergency-action.h:37,
from ../systemd-238/src/core/unit.h:34,
from ../systemd-238/src/core/dbus-timer.h:25,
from ../systemd-238/src/core/timer.c:26:
[...]/sys/mount.h:57:2: error: expected identifier before numeric constant
Not that it matters much, but it seems cleaner to also count those
inputs, even if they do not consume extra storage space.
The test is extended to include an empty input and counts in the test are
adjusted to include it.
https://clang.llvm.org/docs/MemorySanitizer.html#id5 documents this
check as the way to detect MemorySanitizer at compilation time. We
only need to skip the test if MemorySanitizer is used.
Also, use this condition in cg_slice_to_path(). There, the code that is
conditionalized is not harmful in any way (it's just unnecessary), so remove
the FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION condition.
Fixes#8482.
The test for ListenNetlink would abort the loop if a line longer then LINE_MAX
was encountered (read_line() returns -ENOBUFS in that case). Let's use the
the line length limit that the unit file parses uses.
https://oss-fuzz.com/v2/issue/5546208027213824/7094.
