When multiple configuration file groups are shown together (e.g.
systemd-analyze cat-config systemd/system.conf systemd/user.conf), it's nice
to separate them visually.
I tried first to write a line of spaces and underline that. This does not look
too good, because the line is too low. Then I tried a block of blue-background
spaces. In this version, there are two lines, one is full of spaces and
underlined, so visually we get an empty line in the middle.
I then tried underlining the last line of the previous file. This does not look
right, unless the line is full width, i.e. unless spaces are written out until
the end of the line. But when those spaces are added, it's not clear if they
were part of the original file or not. Here, the spaces are between groups, so
it seems less likely that somebody will mistake those spaces for part of the
configuration file.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
This doesn't change the outcome:
(before)
/home/zbyszek/src/systemd/test/test-execute/exec-basic.service:6: Executable path specifies a directory: /usr/bin/test/
exec-basic.service: Failed to create exec-basic.service/start: Unit exec-basic.service is not loaded properly: Exec format error.
(after)
/home/zbyszek/src/systemd/test/test-execute/exec-basic.service:6: Executable path specifies a directory: /usr/bin/test/
Failed to load file /home/zbyszek/src/systemd/test/test-execute/exec-basic.service: Exec format error
(before)
masked.service: Failed to create masked.service/start: Unit masked.service is masked.
(after)
File /home/zbyszek/src/systemd/test/test-execute/masked.service is masked.
but the failure is immediate and the error messages are more direct.
$ build/systemd-analyze time
Bootup is not yet finished (org.freedesktop.systemd1.Manager.FinishTimestampMonotonic=0).
Please try again later.
Hint: Use 'systemctl list-jobs' to see active jobs
The plot command requires a full d-bus bus to fetch the host
information, which seems rather optional, and having a running dbus
daemon is not always desirable. So instead, we try to acquire a full
bus, and if that fails we acquire the systemd bus, in which case we
omit the host information from the output.
We refactor acquire_bus() into two new functions which in addition
makes the call sites clearer.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This adds flags BUS_MAP_STRDUP and BUS_MAP_BOOLEAN_AS_BOOL.
If BUS_MAP_STRDUP is set, then each "s" message is duplicated.
If BUS_MAP_BOOLEAN_AS_BOOL is set, then each "b" message is
written to a bool pointer.
Follow-up for #8488.
See https://github.com/systemd/systemd/pull/8488#discussion_r175816270.
Even if pager_open() fails, in general, we should continue the operations.
All erroneous cases in pager_open() show log message in the function.
So, it is not necessary to check the returned value.
When running tests like test-unit-name, there is not point in setting
up the cgroup and signals and interacting with the environment. Similarly
when running fuzz testing of the parser.
Add new MANAGER_TEST_RUN_BASIC which takes the role of MANAGER_TEST_RUN_MINIMAL,
and redefine MANAGER_TEST_RUN_MINIMAL to just create the basic data structures.
the whole systemd-analyze time logic is based on the fact that monotonic
time 0 is the start of the kernel.
If the firmware does not provide a correct time, firmware_time degrades to
0, which is the start of the kernel. The diference between FinishTime and
firmware_time is thus correct.
That assumption is still true with containers, but the start time of the
kernel is not what the user expects : It's the time when the host booted.
The total is thus still correct, but highly misleading. Containers can be
easily detected (and, in fact, already are) by systemd not reporting any
kernel non-monotonic timestamp.
This patch simply avoids printing a misleading time when it can detect that
case
New debug verb that enables or disables the service runtime watchdogs
and emergency actions during runtime. This is the systemd-analyze
version of the systemd.service_watchdogs command line option.
Let's unify the code for parsing command line verbs, and reuse the
common verbs.[ch] API in systemd-analyze too.
This adds a couple of error messages when people pass too many
arguments. Moreover thus pushes bus allocation into the verb functions,
which corrects a couple of cases where we previously allocated a bus but
really didn't need to.
Other than that behaviour shouldn't really change.
We need to connect to hostnamed, so a private bus connection is no good.
It'd be simpler to use the normal bus connection unconditionally, but
that'd mean that e.g. systemd-analyze set-log-level might not work in
emergency mode. So let's keep trying to use the private connection except
for "plot".
Fixes#7667.
This makes things a bit easier to read I think, and also makes sure we
always use the _unlikely_ wrapper around it, which so far we used
sometimes and other times we didn't. Let's clean that up.
Our CODING_STYLE suggests not comparing with NULL, but relying on C's
downgrade-to-bool feature for that. Fix up some code to match these
guidelines. (This is not comprehensive, the coccinelle output for this
is unfortunately kinda borked)
This little new command can parse, validate, normalize calendar events,
and calculate when they will elapse next. This should be useful for
anyone writing calendar events and who'd like to validate the expression
before running them as timer units.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
Now generators are only run in systemd --test mode, where this makes
most sense (how are you going to test what would happen otherwise?).
Fixes#6842.
v2:
- rename test_run to test_run_flags
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
