Like the Inspiron 1520, the Dell Latitude 2110 emits brightness-control
key events both through atkbd and acpi-video. This suppresses them on
the atkbd side.
Allowed paths are unified betwen the configuration file parses and the bus
property checker. The biggest change is that the bus code now allows "block-"
and "char-" classes. In addition, path_startswith("/dev") was used in the bus
code, and startswith("/dev") was used in the config file code. It seems
reasonable to use path_startswith() which allows a slightly broader class of
strings.
Fixes#3935.
If `--test` command line option was passed, the systemd set skip_setup
to true during bootup. But after this we check again that arg_action is
test or help and opens pager depends on result.
We should skip setup in a case when `--test` is passed, but it is also
safe to set skip_setup in a case of `--help`. So let's remove first
check and move skip_setup = true to the second check.
This makes it easier to debug failed nspawn invocations:
Mounting sysfs on /var/lib/machines/fedora-rawhide/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev (MS_NOSUID|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev/shm (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=1777,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/run (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Bind-mounting /sys/fs/selinux on /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_BIND "")...
Remounting /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting proc on /proc (MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Bind-mounting /proc/sys on /proc/sys (MS_BIND "")...
Remounting /proc/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Bind-mounting /proc/sysrq-trigger on /proc/sysrq-trigger (MS_BIND "")...
Remounting /proc/sysrq-trigger (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting tmpfs on /tmp (MS_STRICTATIME "mode=1777,uid=0,gid=0")...
Mounting tmpfs on /sys/fs/cgroup (MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_STRICTATIME "mode=755,uid=0,gid=0")...
Mounting cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr")...
Failed to mount cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr"): No such file or directory
If stdin is supplied as an fd for transient units (using the
StandardInputFileDescriptor pseudo-property for transient units), then we
should also fix up the TTY ownership, not just when we opened the TTY
ourselves.
This simply drops the explicit is_terminal_input()-based check. Note that
chown_terminal() internally does a much more appropriate isatty()-based check
anyway, hence we can drop this without replacement.
Fixes: #4260
`systemctl isolate initrd-switch-root.target` called by initrd-cleanup.service
kills initrd-cleanup.service itself. Then, initrd-cleanup.service failed and
system goes to emergency shell.
To prevent this problem, this commit adds `Wants=initrd-cleanup.service` to
initrd-switch-root.target.
fixes: #4343.
r was not initialized and would be used if "tcp" was the only option
used for the stub. We should initialize it to 0 to indicate that no
error happened in the udp case.
SIGTERM should be considered a clean exit code for daemons (i.e. long-running
processes, as a daemon without SIGTERM handler may be shut down without issues
via SIGTERM still) while it should not be considered a clean exit code for
commands (i.e. short-running processes).
Let's add two different clean checking modes for this, and use the right one at
the appropriate places.
Fixes: #4275
When we print information about PID 1's crashdump subprocess failing. In this
case we *know* that we do not generate LSB exit codes, as it's basically PID 1
itself that exited there.
Previously we've used free_and_strdup() to fill arg_default_unit with unit
name, If we didn't pass default unit name through a kernel command line or
command line arguments. But we can use just strdup() instead of
free_and_strdup() for this, because we will start fill arg_default_unit
only if it wasn't set before.
Let's get rid of is_clean_exit_lsb(), let's move the logic for the special
handling of the two LSB exit codes into the sysv-generator by writing out
appropriate SuccessExitStatus= lines if the LSB header exists. This is not only
semantically more correct, bug also fixes a bug as the code in service.c that
chose between is_clean_exit_lsb() and is_clean_exit() based this check on
whether a native unit files was available for the unit. However, that check was
bogus since a long time, since the SysV generator was introduced and native
SysV script support was removed from PID 1, as in that case a unit file always
existed.
We are going to add this child as a source to our event loop so we don't
want to block when reading data from it as this will prevent us from
processing other events. Specifically this will block the signalfds
which means if we are waiting for data from curl we won't handle SIGTERM
or SIGINT until we happen to get more data.
Do not make up our own type for ExitStatus, but use the type used by POSIX for
this, which is "int". In particular as we never used that type outside of the
definition of exit_status_to_string() where we internally cast the paramter to
(int) every single time we used it.
Hence, let's simplify things, drop the type and use the kernel type directly.
It is impossible to ship a fully generic PAM configuration upstream.
Therefore, ship a minimal configuration with the systemd --user requirements,
and add a note to DISTRO_PORTING documenting this.
Fixes#4284
console-shell.service was supposed to be useful for normal clean boots
(i.e. multi-user.target or so), as a replacement for logind/getty@.service for
simpler use cases.
But due to the lack of documentation and sanity check one can easily be
confused and enable this service in // with getty@.service.
In this case we end up with both services sharing the same tty which ends up in
strange results.
Even worse, console-shell.service might be failing while getty@.service tries
to acquire the terminal which ends up in the system to poweroff since
console-shell.service uses:
"ExecStopPost=-/usr/bin/systemctl poweroff".
Another issue: this service doesn't work well if plymouth is also used since it
lets the splash screen program run and mess the tty (at least a "plymouth quit"
is missing).
So let's kill it for now.
systemd fills arg_default_unit during startup with default.target
value. But arg_default_unit may be overwritten in parse_argv() or
parse_proc_cmdline_item().
Let's check value of arg_default_unit after calls of parse_argv()
and parse_proc_cmdline_item() and fill it with default.target if
it wasn't filled before. In this way we will not spend unnecessary
time to for filling arg_default_unit with default.target.
