* Add the missing package for mkosi opensuse conf, otherwise TEST-04-JOURNAL
fails with "/usr/lib/systemd/systemd-journal-remote: No such file or
directory"
Signed-off-by: val4oss <github.widget541@passmail.net>
Fixes a regression caused by d307410327.
The link_mode_masks flex array in struct ethtool_link_settings contains
three packed arrays, and the length of each array is given by
link_mode_masks_nwords field:
```
__u32 link_mode_masks[];
/* layout of link_mode_masks fields:
* __u32 map_supported[link_mode_masks_nwords];
* __u32 map_advertising[link_mode_masks_nwords];
* __u32 map_lp_advertising[link_mode_masks_nwords];
*/
```
Hence, we cannot use the received data as is through the union, but need
to shift the array to make each map accessible through the union.
Previously, we have checked journal after TEST-XX-YYYYY.sh, but it was
forgotten when we switched to mkosi.
This re-enable the check but through ExecStartPost=, and drops unnecessary
workarounds for end.service. Then, this drops unnecessary end.service
and testsuite.target.
Fixes the following warning:
```
[ 130.968170] H systemd-networkd[4288]: Restart operation initiated.
[ 130.968265] H systemd-networkd[4288]: Serializing...
[ 130.968274] H systemd-networkd[4288]: There is nothing to serialize.
(snip)
[ 130.978756] H systemd[1]: Stopped systemd-networkd.service.
(snip)
[ 130.991407] H systemd[1]: Starting systemd-networkd.service...
(snip)
[ 131.077440] H systemd-networkd[4318]: Enumeration completed.
[ 131.077471] H systemd-networkd[4318]: Deserializing...
[ 131.077491] H systemd-networkd[4318]: Failed to parse json (line=0, column=0): No data available
[ 131.077524] H systemd-networkd[4318]: Failed to deserialize the previous invocation, ignoring: No data available
```
Otherwise, following debugging log will be saved and the checker for
the varlink-idl log triggers failure:
```
systemd-userwork: processing[3110]: varlink-6-6: Parameters for method
io.systemd.UserDatabase.GetUserRecord() didn't pass validation on field 'service': No anode
```
Fixes the following varlink IDL validation error:
```
systemd-oomd[1687]: varlink-11-11: Parameters for method io.systemd.oom.ReportManagedOOMCGroups()
didn't pass validation on field 'cgroups': No anode
```
Follow-ups for 23ac08115a.
Since the commit, the cgroup path is set only when it is realized.
Fixes the following varlink IDL validation failure:
```
systemd-oomd[1687]: Varlink-IDL: Mandatory field 'path' is null or missing on object, refusing.
```
We might be operating with a newer systemctl on an image with older
systemd and thus without an initrd-preset directory. Before
4a8c395167, we would use the system
presets, let's make sure we keep doing that if we're operating on an
image without initrd presets.
Follow up for 4a8c395167.
Follow-ups for ab56a96194.
Fixes the following failure:
```
TEST-87-AUX-UTILS-VM.sh[1196]: + systemd-run --user --wait --pipe -M testuser@.host -- coredumpctl
TEST-87-AUX-UTILS-VM.sh[1840]: Running as unit: run-p1840-i1841.service; invocation ID: 325a026377aa4cffb046c5a63a8906ab
TEST-87-AUX-UTILS-VM.sh[1853]: Hint: You are currently not seeing messages from other users and the system.
TEST-87-AUX-UTILS-VM.sh[1853]: Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
TEST-87-AUX-UTILS-VM.sh[1853]: Pass -q to turn off this notice.
TEST-87-AUX-UTILS-VM.sh[1853]: Journal file /var/log/journal/6835d335b6684b6197bf071ad66f2678/user-4711.journal is truncated, ignoring file.
TEST-87-AUX-UTILS-VM.sh[1853]: No coredumps found.
TEST-87-AUX-UTILS-VM.sh[1840]: Finished with result: exit-code
TEST-87-AUX-UTILS-VM.sh[1840]: Main processes terminated with: code=exited, status=1/FAILURE
TEST-87-AUX-UTILS-VM.sh[1840]: Service runtime: 154ms
TEST-87-AUX-UTILS-VM.sh[1840]: CPU time consumed: 78ms
TEST-87-AUX-UTILS-VM.sh[1840]: Memory peak: 21.9M (swap: 0B)
```
Otherwise, ExecXYZ= given by drop-ins may be added to a masked unit,
then commands may be unexpectedly executed. For example, if an ExecStop=
is set in a drop-in for a running unit, then 'systemctl mask --now' for
the unit try to invoke the command specified in ExecStop=.
Fixes#38802.
As you can see, something spurious happens in the logs below.
```
initrd-switch-root.target: Trying to enqueue job initrd-switch-root.target/start/isolate
systemd-repart.service: Looking at job systemd-repart.service/stop conflicted_by=no
systemd-repart.service: Looking at job systemd-repart.service/start conflicted_by=no
systemd-repart.service: Fixing conflicting jobs systemd-repart.service/stop,systemd-repart.service/start by deleting job systemd-repart.service/stop
initrd-switch-root.target: Fixing conflicting jobs initrd-switch-root.target/stop,initrd-switch-root.target/start by deleting job initrd-switch-root.target/stop
systemd-repart.service: Deleting job systemd-repart.service/start as dependency of job initrd-switch-root.target/stop
```
The two conflicting jobs for systemd-repart.service are initially queued
as the following:
- initrd-switch-root.target has Wants=initrd-root-fs.target, and
initrd-root-fs.target has Wants=systemd-repart.service (through symlink),
hence starting initrd-switch-root.target tries to start
systemd-repart.service,
- systemd-repart.service has Conflicts=initrd-switch-root.target, hence
starting initrd-switch-root.target tries to stop
systemd-repart.service.
As similar, interestingly(?) starting initrd-switch-root.target tries to
stop initrd-switch-root.target.
So, now there are at least two pairs of conflicting jobs:
- systemd-repart.service: start vs stop,
- initrd-switch-root.target: start vs stop.
As these jobs are induced by starting initrd-switch-root.target, of course
the most important one is the start job for initrd-switch-root.target.
Previously, as you can see in the logs at the beginning, even if
the start job for initrd-switch-root.target is important, we may first
try to resolve the conflict in systemd-repart.service, and may drop the
stop job for systemd-repart.service even if it is relevant to the start
job of initrd-switch-root.target.
This makes first we solve the pair of conflicting jobs for anchor task.
So the stop job for initrd-switch-root.target is dropped first, and the
induced start job for systemd-repart.service is automatically removed,
thus it is not necessary to solve the conflict in systemd-repart.service
anymore.
This is especially important for services that are enabled both in initrd
and after switching root. If a stop job for one of the service is
unexpectedly dropped during switching root, then the service is not stopped
before switching root, and will never start after that.
Fixes#38765.
* 786b8fe1c8 Return false from want_efi() for UKI outputs
* fac86dbc93 mkosi-tools: add qemu/pipewire packages for gui profile for debian
* 3bb98f0e6e Add ncdu to tools tree packages
* 1332b32cb4 config: Fix type for devicetree setting
* eff03569ee initrd: Add intel_pmc_ssram_telemetry module by default
* e04305b030 Make Bootable= determine whether we build a UKI for esp images
* 7252146429 mkosi-obs: use --force also for unzstd
* f58e31e228 mkosi-obs: do not fail if there are no bootloaders in the ESP
* fac3bd4bf1 rhel: Look up entitlement keys and certificates in sandbox
* da814d9634 opensuse: Add support for RISC-V for Tumbleweed
* b1d66c88d0 fedora: Rework rawhide GPG key logic
* b9360f25df Include {sys,conf}ext info in metadata file
* 94c6db6148 Set MakeInitrd=yes in documentation for building custom initrd
* d134013ca8 mkosi-tools: add grub2-common to openSUSE tools tree
* c97d345395 mkosi-tools: virtiofsd is only available on a subset of architectures on debian/ubuntu
There's no guarantee that $GIT_BRANCH is always the same across
stable release branches and main. But we still need to make sure
we switch commits if we're switching between main and release branches.
To make this work, let's not check if the current HEAD commit is an
ancestor of the currently configured origin branch. Instead, let's
check if any of the origin branches contains the current HEAD commit.
This still makes sure that we won't switch commits if we're working
on a local branch while making sure that we do switch commits if we're
switching between main and stable release branches with different
git branches configured for the packaging repo checkout.
These options were added in v255 with commit
cb341090d0, but were not documented as
standalone options in loader.conf. See #29440 for more information.
As a hardening measure it makes sense not to process potentially crafted
data in `openssl_pubkey_to_pem()` before we know that the caller is
authorized to perform the action.
